Title
T1


Standard features include :
  -  Nitrided armatures for long life.
  -  Fully encapsulated coils for durability.
  -  Fast-release brake armatures for accurate registration.
  -  Friction materials carefully chosen for torque and long life.
  -  Wiring that meets CSA standards.


Designed for dry use, the SAB spring-applied brake has been designed for durability and long service life. There are two friction surfaces, and the brake can be adjusted easily to compensate for wear.

The hand release and mounting flange are optional. The fully encapsulated coil is available in any voltage from 6 VDC to 240 VDC. This well-proven design is capable of absorbing large amounts of energy, and is suitable for both dynamic and static applications.

   Drawing :
sab

Specification : (Dimensions in mm)

Type SAB

 15-A 24-A 36-A 80-A

Dynamical 2)                     [Nm]

 160 250 400 800

Hub bore 1) d max

 45 55 70 80

Hub bore                    d min

 30 35 40 50
Diameter A 217 254 302 360
B 196 230 278 330
C 100 120 150 ¡@
D 75 90 120 150
E 62 73 90 140
F 116 135 175 ¡@
G 9 11 11 13
Length H 101 114.5 124.5 153.5
I 12 15 17 20
J 35 40 50 70
K 15 15 20 22
L 9 10 13 ¡@
M 84 97 104 124
N 11 11 14 15
O 43 43 50 50
P 20 20 28 26
  Air gap          a 0.4 0.4 0.5 0.5
  Air gap          amax 1.0 1.0 1.2 1.5
 Weight           kg 18.5 27.6 35.9 ¡@
Micro-switch Yes Yes Yes Yes

 

¡@

line


[ Home  |  Company Info  |  Products  |  Agents   |  Contact us  | ISO Certified ]
Copyright © 1999 Trantex Corporation. All right reserved.
Address: No. 109, Tze Li 2nd St., Kuan Lien Ind. Dist.,Wuchi, Taichung, Taiwan, Repulic of China
Tel: (886) 4-26301648 ;  Fax: (886) 4-26301687 ; E-mail: trantex.corp@msa.hinet.net 
Last updated: March 4, 2009 by James Hsu