FMX

Standard features include :
- Nitrided armatures for long life.
- Fully encapsulated coils for durability.
- Fast-release brake armatures for accurate registration.
- Friction materials carefully chosen for torque and long life.
- Wiring that meets CSA standards.

The FMX clutch/clutch/brake module features a pair of matched clutches and a matched brake mounted on a bearing-supported through shaft. The housing of the FMX module is made from a light alloy, and the open design allows for optimum heat dissipation.

All parts are preadjusted and preassembled, and all bearings are sealed. The clutch hubs are driven at different speeds and/or reversing drive. The brake is used to stop and hold the output. The FMX module can be used to achieve high cycle rates.

SIZE		0.6	1.2	2.5	5	10	20
Static Torque kgm		0.55	1.1	2.2	4.5	9	17
Exciting Voltage DC-V		24	24	24	24	24	24
Capacity (at 20 ºC) W		11	15	20	25	35	45
Max. Revolution RPM		5000	5000	4500	4000	3000	2500
Shaft Dia dj6		11	14	19	24	28	38
Key (Shaft) WxH		4x4	5x5	5x5	7x7	7x7	10x8
Diameter	A	90	110	140	175	200	240
	B	60	80	105	135	155	195
	C+0/-0.5	65	80	90	112	132	160
	D	100	125	150	190	230	290
	Ej6	38	45	55	64	75	90
	F	33	37	47	52	62	74.5
	G	10	12	15	15	18	20
	H	13.5	15	20	24	28	28
	I	6.5	9	11	11	14	14
	J	M4	M4	M6	M6	M6	M10
	J1	3-M4	3-M4	4-M4	4-M4	6-M5	4-M6
	K	27.5	32	35	42	45	47
Length	L	211	246	294	358	440	551
	M	105	130	160	185	230	270
	N	90	110	135	160	200	240
	P	73	83	99.5	124	150	197
	Q	48	53	59.5	74	90	114
	R	47	57	72	93	114	143
	S	25	30	40	50	60	80
	T	20	25	30	40	50	60
Weight kg		4.2	6.5	9.8	18	30.5	60